How to Calculate Overtime on a Time Card

Overtime is not worked out day by day. It is worked out on the week. This guide explains the rule in plain language, then takes one real 45-hour week from raw punches to gross pay, line by line, so you can check any card against it.

Most overtime mistakes start with a reasonable-sounding assumption: that a long day earns overtime. Under US federal law it usually does not. The Fair Labor Standards Act counts overtime by the workweek. Once your hours worked in a single workweek pass 40, every hour after that must be paid at no less than one and a half times your regular rate. Before that line, even a brutal 13-hour day is legally straight time at the federal level, unless your state or your employer's policy says otherwise.

That one fact explains most of the confusion on real time cards. Two employees can work the same total hours in a pay period and be owed different pay, because one crossed 40 in a single week and the other did not. So the calculation always runs in the same order: add up each day, add up the week, split the week at 40, then price the two parts.

The rule, stated plainly

A workweek is any fixed seven-day stretch your employer uses, often Sunday to Saturday or Monday to Sunday. It does not have to match the calendar week, but it has to stay consistent. Hours worked means time you were required to be on duty or on the premises, minus genuine meal breaks where you were fully off duty. Paid holidays, vacation and sick days usually do not count toward the 40, because they are hours paid, not hours worked - which is why a week with a holiday can show 48 paid hours and zero overtime.

The regular rate is normally just your hourly wage. If you earn bonuses or shift differentials, the true regular rate can be a little higher, because the law defines it as total pay for the week divided by total hours worked. For a plain hourly card, though, the math below is the whole story.

The worked week, punch by punch

Meet a warehouse associate earning $20.00 an hour, with a 30-minute unpaid lunch each day. Here is the card for one busy week. Each day total is the span from in to out, minus lunch.

DayInOutLunchDay totalRunning week total
Monday8:00 AM5:30 PM30 min9 hours9
Tuesday8:00 AM6:00 PM30 min9.5 hours18.5
Wednesday9:00 AM5:30 PM30 min8 hours26.5
Thursday7:30 AM6:00 PM30 min10 hours36.5
Friday8:00 AM5:00 PM30 min8.5 hours45

Check a couple of rows the slow way. Tuesday runs 8:00 AM to 6:00 PM, which is 10 hours on the clock; take off the half-hour lunch and you get 9.5 paid hours. Thursday starts at 7:30 AM and ends at 6:00 PM, a span of 10 hours 30 minutes, minus lunch gives exactly 10. Add the five days - 9 + 9.5 + 8 + 10 + 8.5 - and the week totals 45 hours.

Now the split. The first 40 hours are regular hours. The running total shows the week reaching 36.5 hours at the end of Thursday, so on Friday the first 3.5 hours (36.5 up to 40) are still regular time, and the remaining 5 hours of Friday are overtime. That is the whole trick: overtime is not attached to a particular day, it is attached to every hour after the 40th hour of the week.

Hands punching a paper time card into a mechanical clock, the starting point for every time card overtime calculation
Every overtime figure starts here: honest punches, a recorded lunch, and a week added up in order.

Turning the split hours into gross pay

With the split done, pricing the week is two multiplications and one addition. The overtime rate is 1.5 times the regular rate, so $20.00 an hour becomes $30.00 an hour past 40.

Part of the weekHoursRatePay
Regular time (first 40 hours)40$20.00$800.00
Overtime (hours past 40)5$30.00$150.00
Gross pay for the week$950.00

Sanity-check it against the wrong way of doing the math. Paying all 45 hours at straight time would give $900.00, which underpays the week by $50.00 - exactly the half-rate premium (0.5 x $20.00) on each of the 5 overtime hours. If your paycheck ever looks about $10 per overtime hour light at this wage, that missing premium is the first thing to ask payroll about.

Daily overtime, double time, and state rules

Federal law sets the floor, not the ceiling. A handful of states add daily rules. California is the best known: there, hours past 8 in a day earn overtime and hours past 12 earn double time, on top of the weekly rule. Alaska, Colorado and Nevada have their own daily triggers with conditions attached. Union contracts and company policies often promise daily overtime or weekend premiums even where the law does not. The practical takeaway is to ask one question when you start a job: "What triggers overtime here - the week, the day, or both?" Then check your card against that answer, not against a rule you half remember from a previous job in another state.

Double time under federal law does not exist as a general requirement; where it appears, it comes from state law, a contract, or company policy. If your card shows double time, it will be spelled out in one of those three places.

Where overtime calculations go wrong

The classic error is the biweekly blur: a 50-hour week followed by a 30-hour week gets paid as 80 straight hours because the pay period "evens out". It does not even out. The first week owes 10 overtime hours, full stop. The second classic is counting paid time off toward the 40, which quietly moves the overtime line and can cut either way. The third is rounding that only ever rounds down; legal rounding must be neutral over time, a topic we cover in the guide to work time rounding and the 7-minute rule. And the quietest error of all is a lunch deduction applied on a day when you worked straight through - those 30 minutes come off the wrong end of the week and can erase the exact hours that should have been paid at time and a half.

If you fill in your own card, the companion guide on how to fill out a time card shows how to record the week so none of these errors get a foothold.

Run your own week through the calculator

The fastest check takes about a minute. Open the time card calculator, enter your punches and lunch breaks for the week, add your hourly rate, and it splits the week at 40, prices both parts and prints a report you can hold next to your pay stub. If the two disagree, you will know which line to question. For quick single-shift sums, the time calculator on the homepage handles those too.

Frequently asked questions

Is overtime calculated daily or weekly?

Under US federal law, weekly. Overtime is owed for hours worked past 40 in a single workweek, no matter how the days are arranged. A 12-hour day followed by short days may produce no federal overtime at all, while five steady 9-hour days produce 5 overtime hours. A few states, California most famously, add daily overtime rules on top.

Does overtime apply to salaried employees?

It depends on whether the job is exempt. Salaried exempt employees, such as many managers and professionals who meet the legal tests, are not owed overtime. Salaried non-exempt employees are owed it, worked out from their salary converted to an hourly rate. Job title alone does not decide it - the duties and pay tests do.

What is the overtime rate for tipped or piece-rate workers?

Overtime is always based on the regular rate, which for piece-rate work is total earnings divided by total hours for the week, and the overtime premium is half of that rate for hours past 40. Tipped workers have extra rules around the tip credit. These cases are worth checking with payroll directly, because the regular rate is where the mistakes hide.

Can my employer average two weeks to avoid overtime?

No, not for most jobs. Each workweek stands alone under federal law, even when you are paid biweekly. Working 50 hours one week and 30 the next is 10 overtime hours in the first week, not a tidy 80-hour pay period. Hospitals and a few specific industries have special arrangements, but ordinary employers cannot average.

Related guides

How to Fill Out a Time Card, Step by Step

What goes in each box of a time card, how to record lunch, and the small mistakes that cause short pay.

Read the guide

Work Time Rounding and the 7-Minute Rule

How employers round clock-in times legally, what the 7-minute rule really says, and how to check your own times.

Read the guide